16" PowerSharp Starter Kit for Stihl

Free Shipping in the Continental United States

With the Oregon PowerSharp Starter Kit you can now sharpen your chainsaw chain on the saw, on the job, in seconds. This kit is designed for 16-inch Stihl chainsaws. No need for special tools or expertise, no need to remove the chain; in three easy steps, you can have a precisely sharpened chain. The starter kit comes complete with a PowerSharp chain, bar-mount sharpener, sharpening stone, and guide bar--everything you need to have your chain cutting once again with ease and precision.

From Dull to Sharp in Three Easy Steps
The PowerSharp offers a new alternative to sharpening a chain manually on your own, taking it to a shop, or trying to make due with a dull chain.

When your chain becomes dull, simply attach the bar-mount sharpener to the PowerSharp bar by sliding the steel pins through the guide holes--there's no need to remove the chain from the saw. Close and latch the cover and then start the chainsaw. While accelerating the chainsaw press the foot of the sharpener against a solid object, applying light pressure for three to five seconds. The large, spring-loaded, treaded foot allows you to apply controlled pressure, even against uneven surfaces. Within seconds, you're back in the cut with a precision-sharpened chain.

Precision Sharpening Mechanism Can Be Used Multiple Times
With steel pins that go straight through the bar, the design of the PowerSharp sharpening system ensures that there is exact alignment between the cutter and the honing surface, for perfect angles and knife-sharp edges. The thick, crescent-shaped sharpening stone provides a long-lasting honing surface.

The guidance drive link works together with the cutter, cutter depth gauge, and depth gauge tie strap to provide the stability required to create a consistent cutting edge. The chain and the sharpener work together, as a diamond-coated dresser link resurfaces the stone, ensuring optimum honing angles.

Designed to last as long as conventionally sharpened chains, each PowerSharp chain can be sharpened from 5 to 15 times, depending on conditions. A new sharpening stone is included with each new replacement PowerSharp purchased and should be replaced. This kit is for 3/8-inch-pitch low profile chain, .050-inch-gauge cutting systems with 50-drive links.

Portable Sharpening System
The PowerSharp Starter Kit is small enough to fit into your toolbox, and light enough to carry with you, so you'll always be ready to sharpen a dull chain. Though the four components of the system are lightweight, they are extremely durable. Highly visible yellow casing prevents misplacing the kit in the field, even in low light.

The Oregon PowerSharp Starter Kit is covered by a limited lifetime warranty against defects in materials or workmanship.

What's in the Box
Chain, bar-mount sharpener, sharpening stone, guide bar, instructions.

Features:

• Bar-mount sharpener is small, lightweight, and portable. Clamps easily to bar tip.
• PowerSharp guide bar has the alignment and latch pin holes required for use with the bar-mount sharpener.
• Chain features top-sharpening cutter design that can be sharpened in seconds, with the bar-mount sharpener.
• All PowerSharp chain is low-kickback per ANSI B175.1 & CSA Z62.3.

Specifications:

• Bar: 91 Low Profile pitch; laminated body; non-replaceable nose sprocket; small nose radius.
• Chain: 91 Low Profile™ 3/8 in. (9.5mm) pitch, .050 in. (1.3mm) gauge. Sharpen only with PowerSharp sharpener.
• Recommended saw sizes: 2.3 hp (42 cc) and smaller.
• Length: 16" (41 cm)

ATTENTION: PowerSharp® is not intended for use on saws equipped with in-bar tensioning systems like Intenz®. Ensure your model has a 3/8" low profile sprocket (other sprockets are incompatible). PowerSharp® chain is designed to be used with the PowerSharp® guide bar. Use on other guide bars may result in improper fit. Use the bar-mount sharpener ONLY with PowerSharp® chain. Attempted use with other chain will damage the chain and sharpener

Fits the following models with 16" Bars: